How CHARGEGUARD® Select Works:

_______________________________________________________________

Comments(0)

The safe, environmentally friendly alternative to flares. Highly effective LED light modules designed for temporary warning in a wide range of situations and applications. Modules can be used in the horizontal or vertical position and can be attached to highway cones for added visibility. Compact Cordura® duffle bag stores five light modules for ready access.

FEATURES

■ Long lasting, heavy-duty Super-LED modules are super bright, super efficient.

■ Safer than traditional flares …won’t burn clothing or ignite grass or leaf fires.

■ Four standard flash patterns: CometFlash®, SingleFlash, Steady-Burn and FlareFlicker.

■ Electronics are encapsulated for moisture and vibration resistance, lenses and housings are rugged polycarbonate.

■ Kit includes Cordura® carrying case and five LED modules.

■ Environmentally safe, easy to set up and deploy.

■ Visibility range, five to seven miles.

■ Cost effective … LEDs are rated for 100,000 hours of operation.

■ Optional elevation ring adaptor for mounting on any traffic cone or road triangle.

■ Power source: Three alkaline size C batteries, not included.

■ Battery life approximately 100 hours.

■ Available in red and amber.

_________________________________________________________________

Comments(0)

The Whelen Avenger has been released. Full Literature - Click Here

NEW design with a more sleek look than its predecessor,
the Avenger is still a compact little light with a big attitude! Avenger packs full-size Super-LED power that rivals strobe in intensity. This is serious warning protection in a small package that’s easy to mount or transfer from vehicle to vehicle.

FEATURES (all models)

■ Small size and clear outer
lenses make Avenger barely detectable until powered on.
■ Single, dual or split module, Linear Super-LEDs.
■ Standard swivel/bail bracket with three suction cups.
■ Snap-on polycarbonate hood secures with two screws, minimizing
flashback to the driver.
■ Lightweight and sturdy. Rated for 100,000 hours of operation.
■ Polycarbonate assembly is safer than metal in the event of an accident or airbag deployment.

AVN Models:

■ Multiple Scan-Lock™ flash
patterns. 27 patterns on single unit and 34 patterns on dual.
■ Selection switch for flash
patterns is now located on the cigar lighter plug.
■ Split LED models available.
■ Eight foot straight cord with cigar plug On/Off switch and Scan-Lock™ flash pattern control.

AVNS Synchronized Models:

■ Synchronized models for unified warning lighting on your vehicle.
■ Multiple Scan-Lock flash
patterns. 54 patterns on single unit and 69 patterns on dual.
■ Phase I and Phase 2 for alternate
and simultaneous flashing.
■ Standard 4-wire pigtails.

Single Modules:

AVN1* ……….Solid color, red, blue, amber or white
AVNS1* ……..Solid color, synchronized, red, blue, amber or white
AVN1J ……….Split color red/blue
AVN1D ………Split color red/white

Dual Modules:

AVN2** ……Solid color
AVNS2** ….Solid color, synchronized

Options:

AVNBKT1* …..Low profile mounting (headliner) bracket for AV1 Series
AVNBKT2 ……Low profile mounting (headliner) bracket for AV2 Series.
AVNBKT3 ……Visor mounting bracket, each (2 required for dual unit).
AVNBKT4 ……Adjustable height bracket kit, for all Avengers.
AVBKT5 ……..Headliner Mounting Bracket for 2003-2008 Crown Vic’s for All Avengers.

______________________________________________________________

Comments(1)

Industry’s First Magnesium Docking Station
Setting the Industry Standard

The CF30 magnesium dock represents innovative design and break-through technology, both utility and design patents are pending for this product.

View the entire Toughbook 30 Mag Docking Station product line:

• 7160-0119 (No RF)
• 7160-0119-01 (Single RF)
• 7160-0119-02 (Dual RF)
• 7160-0120 (Autolocking w/No RF)
• 7160-0120-01 (Autolocking w/Single RF)
• 7160-0120-02 (Autolocking w/Dual RF)

Rock Solid Releases - New Toughbook 30 Magnesium Docking Station

• Press Release - Integrating the Metal of the Future into Gamber-Johnson Innovative Line of Docking Stations
• Press Release - Cost-effective, high-performance docking station for the Panasonic Toughbook 30
• White Paper - Magnesium, Metal of the future: Evolutions in Technology Bring Innovations to Design: Applicability of Magnesium Alloy AZ91-D for Rugged Docking Stations

FAQs

1. Why make the move to magnesium now?
2. What are the main advantages of a magnesium docking station for the consumer?
3. How strong is magnesium?
4. Can a magnesium docking station withstand rugged use?
5. Does magnesium curtail precise design?
6. Does the CF30 need to be constructed of a thicker gage because of the lightweight nature of magnesium?

1. How well does magnesium absorb vibration?
2. Is magnesium use and extraction an eco-friendly process?
3. Can magnesium handle the elevated temperatures that some laptop computers generate?
4. Can magnesium be cast into user-friendly docking stations?
5. Can magnesium shield electromagnetic interference (EMI)?
6. Has Gamber-Johnson tested the magnesium alloy CF30?

Why make the move to magnesium now?

Magnesium’s growing popularity is due, in large part, to simply gaining a better understanding of the element, its abundance and its uses. In addition, magnesium’s reputation as a highly flammable entity has cooled. Yes – powdered, shaved or thin strip magnesium is easy to ignite, but try to do the same to magnesium in mass or bulk.

Because magnesium alloys for die-casting have an ignition temperature of 850°F, a cast magnesium component is usually the last thing to ignite in a fire. And because magnesium has such good conductivity, a high-energy source and an ample supply of air are needed to even reach this ignition temperature. Tests have shown that flames consume a vehicle before magnesium parts even burn in a car fire. Magnesium keeps its cool.

The entire FAQ is listed after the more button below - Or visit their site for more info

(more…)

Comments(0)

E-ONE Introduces Synergy™ at the 2008 FDIC
(4/10/2008)

Ocala, FL, (April 8, 2008) – Synergy, E-ONE’s new enclosed top-mount pumper design featuring up to 528 cubic feet of compartment storage on a compact wheelbase, was introduced Thursday at the 2008 Fire Department Instructors’ Conference.

“Synergy’s design allows firefighters to arrive on the scene with more of their mission-critical equipment, while the shorter wheelbase makes getting to the scene a bit easier,” said Charles Chilton, E-ONE vice president of engineering and product development.  “The side- and top-mount configurations also provide unobstructed access to the pump panel, resulting in safer on-scene operations.”

The unique Synergy configuration features a compact pump module design which allows for more overall customization and is available on a commercial chassis or any E-ONE custom chassis.  Synergy also features a 1250gpm pump rating and various NFPA ladder and/or equipment storage options.

_______________________________________________________________

Pierce Manufacturing Displays Evolution of PUC Apparatus

Release Date : April 10, 2008

April 10, 2008, Appleton, Wis. —  Pierce Manufacturing Inc., North America’s largest manufacturer of fire and rescue apparatus, showcased its expanded line of PUC – Pierce Ultimate Configuration – offerings including a top mount pumper, a 75-foot aluminum aerial ladder and a Contender® PUC at the Fire Department Instructor’s Conference in Indianapolis.

The expanded Pierce® PUC product line includes:

• Top Mount PUC – places the pump operator off the street and in an elevated position for better safety and visibility, while reducing the wheelbase 3 to 4 feet and still maintaining all the PUC features. The top mount PUC also offers increased safety with enclosed access steps, lowered crosslays and ease of use with true pump and roll capabilities.
• 75-foot Aluminum Ladder PUC – features 22 percent more storage space and up to 5 inches shorter wheelbase than traditional 75-foot aluminum ladders. The PUC design lowers crosslays, provides storage for bulky items such as stokes baskets and backboards, and utilizes a simple two-step pump shift operation.
• Custom Contender PUC – allows fire departments to customize their rigs cost-effectively and still obtain all the benefits of the PUC design. The Contender PUC also features a redesigned cab with more interior space for crew and equipment.

“The expanded PUC product line gives firefighters additional options in selecting a truck that meets the specific needs of their department without making compromises,” said Wilson Jones, president of Pierce Manufacturing. “We took a design that revolutionized the industry when it was launched in April 2007, and due to its success and industry demand now have it available in a variety of configurations to meet the needs of our customers, no matter the application.”

The PUC was launched last year following extensive industry research by Pierce to meet the needs of fire departments for apparatus that is easier to use, easier to stay safer, easier to store more, easier to service and maintain, and easier to maneuver. The PUC is an industry-changing, multi-purpose response vehicle that dramatically changes the way fire service configures apparatus by removing the bulky pumphouse without compromising fire fighting capabilities.

About Pierce Manufacturing
Pierce Manufacturing Inc., an Oshkosh Corporation [NYSE: OSK] company, is the leading North American manufacturer of custom fire apparatus. Products include custom and commercial pumpers, aerials, rescue trucks, wildland trucks, minipumpers, elliptical tankers and homeland security apparatus. In addition, Pierce designs its own foam systems and was the first company to introduce frontal airbags and the Side Roll Protection system to fire apparatus. To learn more about Pierce, visit www.piercemfg.com.

______________________________________________________________

Comments(0)